Direct injection system
14 Strong full guided double tines
81.5” working width |
|
Features
|
PowerBind
- Front mounted direct injection system for a sure start every time
- Positive feed of net into the bale chamber
- Net permanently retained in injection arm, no time spent on first pick up of the net prior to injection
- No effect from windy conditions
- No feed rollers
- Very fast operation
- Perfect net spread on the bale
- Net is going fully from side to side
- Edge covering net types can be used (48’’ or 51’’)
- Fast and easy net loading
- Simple and easy threading of net
- Storage for two extra rolls of net
|
|
SuperCut-14
- Reliable cutting device
- 15.75” Rotor
- diameter
- 14 Strong full guided double tines
- Knives controlled from tractor cab
- 2.75” Theoretical chop length
- High capacity in all conditions
- The crop is forced into the chamber through the knives
- Instant bale start in all the conditions
- Perfect cutting quality
- Hardened knives
- Each knife individually spring protected
- Automatic knife re-engagement
|
|
DropFloor
- Easy to use technology
- Operate directly from tractor cab
- Single acting valve needed
- Fast and efficient rotor un-blocking device
- Fast & easy to use system
- Select ‘Drop floor’ on Focus control box
- Operate tractor valve to lower floor and re-engage PTO
- Operate tractor valve to close floor and start baling again
- A safe system to remove a blockage
- Huge clearance between floor and rotor
- 100% efficient blockage clearance
|
Pick-Up
- High capacity – Perfect raking
- Small diameter pick-up
- 81.5” working width
- 73.6” Tine to tine
- 2.36” Tine spacing
- 5 Rows of tines
- High rotation speed
- High reliability
- Double cam drive
- 2 central supports for tine bars
- Big diameter driving sprocket
|
|
Intelligent Density 3D
- Electronic proportional density control
- Hydraulic density control up to 2750 PSI
- Tensioner arm with twin tension springs
- As the bale grows, the pressure increases
- Density control from tractor cab
- Full control over bale structure from tractor seat
- 3 different zones adjustable in pressure and diameter + 0 PSI core
- Zero pressure function also allows a soft center bale to be produced if required
|
|
ISOBUS Control
BV 5160 - Full ISOBUS Compatibility
- Simplicity – Efficiency – Productivity
- Choose between Focus II(Mono) or IsoMatch Tellus (color touch-screen) terminal
- Connect directly to an ISOBUS certified compatible tractor display in a few seconds
- Very easy to use interface
- Full control on board
- Bale diameter adjustment
- Density adjustment in three zones
- Current bale diameter (bale growing)
- Left/Right driving indicator
- Selection of twine or net binding
- Adjustment of twine and net binding cycles Manual or automatic binding start
- Total bale counter & 40 field counters
- Selection of pick-up, drop floor & knives
- Performance monitor (bales per hour)
|
|
Bale chamber
- Chamber design with reduced critical areas for crop build up in wet conditions
- Instant crop rotation
- 3 rollers: 1 ribbed bottom, 2 Profiled fronts
- 5 endless belts
- 8.66” wide
- Triple layer (0.31” thickness)
- Good bale start in all conditions
- Two profiled rollers ensure instant bale rotation
- High bale density due to immediate rolling and pressurizing
|
