Tr?id=350122287171365&ev=PageView&noscript=


Stock # E06518

Bauma Light 1P24

Videos
Dealer Price $4,950 CAD
Overview

3 Point Hitch Stump Grinder - 1P24

The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1 3PH. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24" Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10" above ground and 6" below ground. With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes.

All Baumalight stump grinders are made in North America and sold through dealers so you always will have local support to service or support your stump grinder. Canadian list price is $3,395 and US list price is $2,716, we offer free freight to all North American dealers who are not in remote areas as well as a free 6-pack of teeth. We just recently started shipping a new design that is compatible with most CAT I quick hitches and also ship with slip clutch PTO shafts now. This update is featured on some of the later videos on Tractor Time with Tim (TTWT).

 

Specifications
Model
1P24
Year
2022
Sale Type
New
Manufacturer
Bauma Light
features
 
QC Generators outlets

Quick Hitch Compatible

The 1P24 Stump Grinder is CAT 1 Quick Hitch compatible, allowing you to easily connect to your compact tractor.

 

QC Generators outlets

Slip Clutch PTO Shaft

The 1P24 Stump Grinder includes a slip clutch PTO shaft. In the event that the grinder hits a rock, the slip clutch is designed to slip so that the shaft is not damaged. (this started in mid 2020).

QC Generators outlets

Self-Regulating Feed

For smoother operation, the 1P24 3-point hitch stump grinder features a self-regulating feed function that uses the weight of the grinder head. If you suddenly advance your tractor while grinding, a hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump.

QC Generators outlets

Carbide Tipped

Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.

QC Generators outlets

More Teeth

Many hands make light work, or in this case fine mulch faster and easier. The high number of teeth means that each tooth does less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of these rugged teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement.

 

QC Generators outlets

Rotor

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

QC Generators outlets

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

QC Generators outlets Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

 

specifications
Model No. 1P24
Recommended HP Size 20-45
Maximum Engine HP 50
Maximum PTO HP 40
Transmission Hydrostatic only
Hydraulic GPM --
Rotor Size 24"
Number of Teeth 34
Tooth Construction Carbide steel bolt-in
Cutting Wheel Speed 540 RPM
Cutting Height - Above Ground 10"
Cutting Depth - Below Ground 6"
Maximum Cutting Depth - Per Pass 5"
Maximum Horizontal Cut 22"
Swing Arc
Hub Torque 803 Ft.-Lbs.
Over Torque Protection Slip clutch
Hitch Cat I
No. of Remotes Required - Hydraulic 0
Requires 12 Volt DC No
Input Speed 540
Unit Weight (Shipping) Lbs. 350
Width (Shipping) 48"
Length (Shipping) 48"
Videos

Videos