Bauma Light S28
Skidsteer Stump Grinder with swing cylinder- S28
The S28 skid steer stump grinder is designed for high flow and higher horsepower skid steers. Baumalight’s most powerful model, the S28 adds a high volume hydraulic motor and a gearbox that increases the torque to the cutting head giving you the best of precision, power and speed in your stump grinding. Cutting depth is up to 15" below ground with a swing radius of 80 degrees. The floating deflector safely directs the flow of debris for quick clean up. With it’s swing cylinder the S28 is a good choice for skidsteer stump grinding on close cut grass such as golf courses as well as for stump grinder rental on large skidsteers and track loaders.
We offer 8 pin and 14 pin AUX electrical plugs as well as the 7 pin Bobcat so you can use the controls in your cab with no extra wiring or hand controls.
Remote This 12V remote allows you to control your Stump Blaster from within the cab of your skid steer. This remote comes standard with S24 and S28 models.
|
Carbide Tipped Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust. |
|
Baumalight now offers a more direct and simple way of connecting to your skidsteer’s auxiliary electrical connection. Simply connect the hydraulics and plug in the electrical. Now you can control the attachment from inside your cab. |
More Teeth The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.
|
|
Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options. |
|
Fine tune the performance of your Stump Blaster easily with the Flow Control knob. The Flow Control allows you to adjust the cutting pass speed, to match the size and performance of your tractor. This gives you the smoothest cut possible and with the full return back to the start position, the quickest overall stump grinding time possible. |
|
The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure. |
|
Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options. |
Rotor The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps. |
|
Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime. |
AUX Plug
Hydraulic Motor
Flow Control
More Clearance
Hydraulic Motor
Greaseable Pins
| Model No. | S28 |
|---|---|
| Recommended HP Size | 50-120 |
| Maximum Carrier Size | Check GPM & PSI |
| Motor Type | Gerotor |
| Hydraulic GPM | Check Stump Cutting Size Chart |
| Rotor Size | 24" |
| Number of Teeth | 34 |
| Tooth Construction | Planer |
| Cutting Wheel Speed | Depends on GPM |
| Cutting Height - Above Ground | No limit |
| Cutting Depth - Below Ground | 10" |
| Maximum Cutting Depth - Per Pass | 6" |
| Maximum Horizontal Cut | 22" |
| Swing Arc | 80° |
| Hub Torque | 803 Ft.-Lbs. |
| Over Torque Protection | Relieve valve |
| Hitch | Quick Attach |
| No. of Remotes Required - Hydraulic | 1 |
| Requires 12 Volt DC | Yes |
| Unit Weight (Shipping) Lbs. | 995 |
Videos
TOPLINE TRAILERS
1226 County Road 31, Winchester, Ontario, Canada
Phone: (613)-774-0992
Phone: (888)-701-6185
| Monday - Friday | 8:00 am - 5:00 pm |
| Saturday | 8:00AM - 12:00PM |
| Sunday | Closed |
Contact Us
TOPLINE TRAILER
1226 County Road 31, Winchester, Ontario, Canada
Phone: (613)-774-0992
Phone: (888)-701-6185
Hours
Monday - Friday
8:00 am - 5:00 pm
Saturday
8:00AM - 12:00PM
Sunday
Closed
Location
