TN236 Trencher for Mini Tool Carrier
The ideal solution when you need to cut a trench in a tight space, the TN236 Trencher is small but aggressive. A great tool for landscapers, the TN236 Trencher is designed for mini-skidsteers and mini track loaders between 1500 - 4000 lbs. The TN236 will cut trenches up to 36” deep and between 4” to 6” wide, depending on the chain option. The TN236 Trencher is powered by a planetary drive system. With no roller chain to worry about, the planetary drive unit delivers hydraulic power directly to the sprocket of the digging chain for optimal trenching performance.
![]() side auger Baumalight Trenchers are designed with a convenient side auger. The side auger keeps the dirt clear from the trenching action but still near the trench when it’s time for back filling. |
The Trencher has a crumb scraper bar as standard equipment, this helps to scrape and sweep extra dirt and debris into the chain where it is lifted out of the trench. The heavy construction and hinged design mean that the scraper performs no matter what depth of trench you are digging. |
![]() PLANETARY DRIVE SYSTEM The sealed drive keeps the dirt out and the trencher going. The compact and stron g planetary drive unit delivers the hydraulic power directly to the sprocket of the digging chain for good digging performance. There are no roller chains that jump or stretch. Maximum torque transfer. The motor is mounted directly in-line with the main sprocket.
|
![]() solid steel nose The Baumalight Trencher’s heavy duty nose is precision machined from a piece of solid steel. It runs freely on dual tapered roller bearings to deal with the extreme forces of trenching. Dirt is the enemy of all bearings. A precision machined washer protects the bearings from rocks and dirt. This initial barricade is reinforced by the rubber seal on the bearings, finishing the job is the easily accessible grease fitting which keeps the bearings lubricated and protected from moisture and keeps our nose running freely. |
Adjusting the chain tension with a couple of pumps. The grease cylinder tensioner allows you to adjust the tension of the chain quickly with only a grease gun. By applying grease to an internal cylinder the roller nose is pushed forward taking the slack out of the chain. What could be a long frustrating process is now a few quick pumps. |
TN236 | |
---|---|
Baumalight Connection Code |
- |
Trencher Depth | 36" |
Trencher Width | 4" to 6" |
Drive type | Planetary |
Main shaft size | 2-9/16" solid hardened steel |
Over torque protection | Hydraulic relief |
Horse Power (HP) | 40 - 100 |
Min. / Max. GPM Skidsteer | 10 to 20 |
Min. / Max. GPM Tractor/Excavator | N/A |
Weight | 810 lbs. |