ID # 17260718

Bauma Light iMP772

Call for Price

iMP772 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 700 series Baumalight mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The 700 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth. Their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 700 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. Its flat profile however makes it vulnerable to shattering on impact with rocks and other debris.
Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. Also unique on the MP560 and bigger sizes of tractor mount mulchers is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results.
With direct drive from the engine, all the way through the heavy duty gear box to the teeth a brush mulcher on the PTO of a tractor is the most efficient way to use a brush mulcher for land clearing.

Sale Type
Bauma Light


The integrated brush bar helps control the brush and bend taller brush for easier mulching.

ADJUSTABLE SKID SHOES Adjustable skid shoes

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.


700 Series Ripper Teeth 700 Series Ripper Teeth

The 700 Series tooth utilizes the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.


Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.

Hardened Tooth Holders

These heavy-duty tooth holders resist bending and keep you working longer.

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Slip Clutch

To protect the gearbox and drive system, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life


Equipped with front and rear hydraulically controlled debris doors. They are controlled from the cab to give the operator more control of the mulching action. When front door is closed, the mulch debris is more controlled and a finer mulch is produced. Open the rear door to better attack stubborn brush by exposing more of the rotor.


Reinforced Belt

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Chain curtain

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

Greaseable pins

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.


Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

heavy duty frame

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.


Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.


specifications – comparison chart


Model No. MP348 MP360 MP548 MP560 MP572 iSeries MP772 Large Shaft to up the HP
Path Width 60" 72" 62" 75" 87" 84" D002134
Rotor Width 48" 60" 48" 60" 72" 72"  
Maximum Engine HP 50 55 75 75 125 135 90 - 155 PTO Hp
Minimum Engine HP 25 30 40 45 50 90  
Maximum PTO HP 40 45 65 65 115 125 Do not exceed 165 Engine Hp
Cutting Depth Level Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 4" Below  
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tapper Fit  
Number of Cutters 60 74 104 126 160 94  
Rotor Shaft Size 2" 2" 2" 2" 2" 2.5"  
Rotor Diameter (tool tips) 15" 15" 15" 15" 15" 17.25"  
Rotor Weight (with tools) 230 lbs 315 lbs 480 lbs 575 lbs 700 lbs 930 lbs  
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 CAT 2 or 3  
Quick hitch compatibility No No No No No No No
Drive Speed 540 540 540 540 1,000 1,000  
Drive Speed Options         540(Max Engine HP 110) 540(Max Engine HP 110)  
Gearbox Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"  
Tractor End Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch  
Unit Weight 1050 lbs 1200 lbs 1600 lbs 2145 lbs 2500 lbs 4558 lbs  
Hydraulic Requirements Not Applicable Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes