ID # 17260758

Bauma Light CP572

Call for Price

CP572 PTO Rotary Brush Mower

4 blades come standard on the CP572 tractor mount 72” rotary bush mower. The Brush Bar helps to funnel brush under the Brush Cutt to the waiting blades. The double arch design of the push bar works to pull the taller, heavier brush to the hardened blades, making quick work of woody brush and saplings. If you have a 45 to 75 Hp tractor then adding a 3-point hitch rotary mower Brush Cutt attachment will help you maintain fence lines, improve pasture land as well as lane and road side weed control rough cut grass cutting.

Sale Type
Bauma Light
QC Generators outlets

Two Cuts per Pass

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.

QC Generators outlets

Gear Box

The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.

QC Generators outlets

Chain Curtain

A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Brush Cutt uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.

QC Generators outlets
4-Way Model

Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second.

QC Generators outlets


Using a 3/4" top plate and a 3/8" bottom plate this heavy duty rotor sandwiches the 4–way blade assembly in place.

QC Generators outlets


To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy-duty output shaft shield.

QC Generators outlets

Powder Coated Finish

Heavy-duty construction and a durable powder-coated finish.

QC Generators outlets

Open Front with Push Bar

The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.


specifications – comparison chart


Model No. CP572
Maximum Brush Size 4"
Discharge Protection Open Front with Push Bar
Link Chain Curtain on Back
Path Width 82"
Cutting Width 72"
Low Cutting Height 2.5"
Number of Blades 4
Slashes per Second 52
Attachment Type CAT 2
Quick hitch compatibility No
Maximum Engine HP 85
Maximum PTO HP 75
Minimum Carrier Weight 5000 lbs.
System Protection 4-Disk Clutch
Shipping Dimensions (LxWxH) 88"x72"x36"
Deck Structure 1/4" steel
Unit Weight 1900 lbs.
Shipping Weight 1885 lbs.